Dodge Durango Forum II

Re^2: Rerouting plug wires

I've already replaced the plugs twice (Autolites and Champion), replaced the plug wires, Dist cap and rotor with Brass connections, tried a PCM from another D (same model), tried a IAC valve from another D, tried a TPS from another D, replaced the 02 sensors, replaced the PCV, removed and cleaned the TB, cleaned the combustion chamber with Mopar Combustion Chamber Cleaner, tried Techron, and the list goes on. The compression looks good, and the vacuum pressure seems to be fine.

I'm finding this just a little frustrating.

Any other ideas would certainly be appreciated, however. I'll try anything at this point. But I'd rather not reprogram the PCM.

Thanks!

Jay
'99 5.2L

Wed Jun 30