Dodge Durango Forum II
Re: brakes yet again
jimbo [MA]00 SLT 5.9L PT4WD
jwmelloni@comcast.net
The notch formed on the pad guide most likely because the rotor was warped. The back and forth movement will cause a wear mark. You can smooth it out and put a light coating of silicone grease on the pad guides when you reassemble the brakes. I had a similar situation on my '00.jimbo
![[ Previous ]](../../../ceilidh-icons/ceil_prv.gif)
![[ Next ]](../../../ceilidh-icons/ceil_nxt.gif)
![[ Index ]](../../../ceilidh-icons/ceil_ind.gif)
Wed Jun 30