Dodge Durango Forum II

P700 CE

William Horst NJ 2000 SLT Plus
bhorst@dsmgarage.com

About 4 weeks ago I changed the filters and fluid on my 4.7L Transmission. I used OEM filters and Amsoil fluid. About 3 weeks later the D would stall at a stop (while in gear). I did the basics: spark plugs, cleaning the TB. Problem persisted, so I brought it to the dealer. The service manager figured out what the problem was after a few hours of work. The O-Ring was not fully seated on the Transmission Pump. So I drained the t-fluid, dropped the pan, and seated the o-ring properly and put everything back together. The D now idles perfectly and once I had the correct fluid level, the D shifted fine. The problem is I have a P700 error code that I just cant get to go away. I have reset the PCM 2 times now, but the P700 CE will not go away. Any idea on this one? I only drive the D a few miles a day, so I am not sure if it will go away after time?

Thanks for your help,

Will..

Wed Mar 31