Dodge Durango Forum II
Re: Machining front rotors...
Mickey D [PA] [2001 4.7 SLT]
daubertm@aol.com
Replace the pads with freshly machined rotors. Start fresh and let the pads wear in to the rotors. Pads are cheap and you will eliminate any problems or glazing you may have had with the old ones.
![[ Previous ]](../../../ceilidh-icons/ceil_prv.gif)
![[ Next ]](../../../ceilidh-icons/ceil_nxt.gif)
![[ Index ]](../../../ceilidh-icons/ceil_ind.gif)
Sun Feb 29