Dodge Durango Forum II
Re: Do I need an impact wrench to break the old shock mounts loose?
Joe Levy [NY 2K CPR SLT 5.9 3.92 PT4WD]
joe@levyclan.us
Breaker bar will probably work, but your D is older than what mine was when we did it. Anyway, breaker bar and an oversized gorilla should get you going.
You'll also need a torque wrench to tighten things down on the new ones. Here are the torque specs:
Front Top 19 ft-lbs - you'll need vice-grips or equiv to hold the stud in place. Also use some thread-lock to keep it tight.
Front Bottom 80 ft-lbs
Back Upper and Lower - 70 ft-lbsJoe
![[ Previous ]](../../../ceilidh-icons/ceil_prv.gif)
![[ Next ]](../../../ceilidh-icons/ceil_nxt.gif)
![[ Index ]](../../../ceilidh-icons/ceil_ind.gif)
Sun Feb 29