Dodge Durango Forum II

Re: Steering gone crazy

Susie [VA-01 DGR RT Stage 3 FMTB]
vagirl1952@cox.net

Here's a possibility I found in the archives.
Hope this helps,
Susie

--------------------------------------------------------------------------------
The Cause...
Anthony Bruns
bruns@mindless.com

--------------------------------------------------------------------------------
For those of you interested, below I have described what the dealer had found wrong with my "steering noise" : Slight creaking noise from steering well area, looked up TSB's 19-011-01 (lubricated intermediate shaft flex coupling), the noise was still there. Looked up TSB 19-20-81-94 Failure code 60 (Insufficient lubrication inspecting column components) they then used a stethascope and determined the noise to be from clockspring area. They removed the clockspring and the noise was gone, so the installed a new clockspring. This fixed the problem and it was under warranty which was a good thing, around $250 for the fix if not.

Fri May 30