Dodge Durango Forum II Archive
Re^3: Headlight Assembley Replacement
Chuck T. [NY] ['00 Black 4.7 SLT]
chuckturr@hotmail.com
The torx head bolts do NOT remove the headlight assembly...that was the critical and fatal mistake that I made the first time I went to replace my headlights. There are two bolts under the corner marker and an additional one on the upper side of the inside of the headlight assembly itself...removing those and pulling firmly and steadily on the headlight assembly will pop out the hole-socket piece holding the 4th corner in...after that replacing the bulb should be a snap.Chuck
![[ Previous ]](../../../ceilidh-icons/ceil_prv.gif)
![[ Next ]](../../../ceilidh-icons/ceil_nxt.gif)
![[ Index ]](../../../ceilidh-icons/ceil_ind.gif)
Sat Sep 1