Dodge Durango Forum II Archive

Install of SS valance.....

Susie[Scarlett-01 RT Dark Garnet Red 3.92 ft4wd]
vagirl1952@home.com

No Ross, nothing hit the valance. On the install of the valance, start with the 2 outside pieces, or the "Ends" as there are 4 pieces. They are held on with clips w/back facing teeth. The clips hold the grille insert pieces, on to the plastic bumper guard. On the last insert of the 4, use a scribe, or bent coat hanger, with a small hook bent into 1 end. Stick the clips on to the back of the bumper guard, just a little bit. Slide the grille insert in until it just touches the clips. Then, take your hook through the insert, and hold the clip while you slide the insert further back. Do this for each of the clips, and it's either 3 or 4, for the last insert, as it's real tight working area.
it's a real job on this last insert, and helps a lot if you have small hands.
Hope this helps Ross.
~Susie

[ This message was edited on Tue May 1 at 9:04pm by the author ]

Tue May 1